21″ x 60″ Crystal Right CR200 Simplex Filter, Autotrol 298 2″ 5.5 m3/hr
£2,862.00 excl. VAT
Crystal Right works by an ion exchange process which reduces iron, manganese ammonia and hardness and can increase low pH all in a single process. The minimum pH requirement is 6. The regeneration process is exactly the same as that used in a water softener and requires regeneration with salt There are two types of Crystal Right. CR100 is used where the pH is over 6 and when the pH is low often increases the pH. CR200 is used where the pH is 7 or above (has a higher capacity). Consult the specification sheet for water quality conditions.
This filter unit is supplied partially assembled for shipping. Some assembly will be required. All components and instructions will be supplied.
Supplied with the Autotrol 298 with frictionless sealing, fully adjustable 3 or 5 cycle control and service flow rate of 50 gpm (345 lpm) with a backwash of 89 gpm (404 lpm)
|Dimensions||55.2 × 57.9 × 221.2 cm|
|Cylinder Size (Inches)||
21 x 60
|Max Flow (m3/hr)||
|Backwash Flow Rate m3/hr|
|Resin Volume (Litres)||