10″ x 54″ Turbidex Sediment Filter, Clack WS1TC 1″ 1.5 m3/hr

10″ x 54″ Turbidex Sediment Filter, Clack WS1TC 1″ 1.5 m3/hr

£293.00 excl. VAT

Available: In Stock
Quantity: 100

Turbidex is a unique natural clinoptilolite ore that has many outstanding advantages over common filter sands used for sediment reduction. Turbidex is very angular, rough surfaced and has microporous void spaces. This creates a surface area over 100 times greater than sand and can reduce suspended solids down to 5 microns or less (sand filters down to about 40 microns). Turbidex prevents the rapid build up of head loss associated with sand filters and allows longer periods between back washes. Because of its high porosity and hydrophilic nature, Turbidex can operate at much higher flow rates than conventional sediment filters.

This sediment filter unit is supplied partially assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

Supplied withthe Clack 1″ WS1TC with Time Control with fully adjustable 6-cycle control delivering controlled backwash, downflow brining/slow rinse, second backwash, fast rinse, refill and downflow service

Dimensions 26.9 × 39 × 159.7 cm
Cylinder Size (Inches)

10 x 54

Connector Size


Max Flow (m3/hr)

1.5 m3/hr

Backwash Flow Rate m3/hr

Resin Volume (Litres)



Valve Model

Clack WS1TC

Valve Brand

Media Volume


There are no reviews yet.

Be the first to review “10″ x 54″ Turbidex Sediment Filter, Clack WS1TC 1″ 1.5 m3/hr”

Your email address will not be published. Required fields are marked *

Valve / Head Unit Data Sheet


Filter Media Datasheet


Operation Manual

  • Fast delivery nationwide
Wildcard SSL