21″ x 60″ Turbidex Sediment Filter, Autotrol 293 2″ 6.6 m3/hr
£1,349.00 excl. VAT
Turbidex is a unique natural clinoptilolite ore that has many outstanding advantages over common filter sands used for sediment reduction. Turbidex is very angular, rough surfaced and has microporous void spaces. This creates a surface area over 100 times greater than sand and can reduce suspended solids down to 5 microns or less (sand filters down to about 40 microns). Turbidex prevents the rapid build up of head loss associated with sand filters and allows longer periods between back washes. Because of its high porosity and hydrophilic nature, Turbidex can operate at much higher flow rates than conventional sediment filters.
This sediment filter unit is supplied partially assembled for shipping. Some assembly will be required. All components and instructions will be supplied.
Supplied with the Autotrol 293 with frictionless sealing, fully adjustable 3 or 5 cycle control and service flow rate of 50 gpm (345 lpm) with a backwash of 89 gpm (404 lpm)
|Dimensions||55.2 × 57.9 × 221.2 cm|
|Cylinder Size (Inches)||
21 x 60
|Max Flow (m3/hr)||
|Backwash Flow Rate m3/hr|
|Resin Volume (Litres)||