30″ x 72″ Filter Ag Sediment Filter, Autotrol 293 2″ 5.6 m3/hr
£2,118.00 excl. VAT
Sediment filters are needed when the water supply is cloudy or turbid. The easiest way to remove the particles is by passing the water through a media where the particles get stuck allowing clear water to flow through. The particles can be periodically backwashed away to drain. Sand is the ideal media for this. Only the highest quality, triple washed 0.4 to 0.8mm size water treatment grade sand is used in these systems (typically reducing particles to about 40m). A sand Filter Ag mix gives filtration down to about 20m and Turbidex (see previous page) can reduce particles down to 5m.
This sediment filter unit is supplied partially assembled for shipping. Some assembly will be required. All components and instructions will be supplied.
Supplied with the Autotrol 293 with frictionless sealing, fully adjustable 3 or 5 cycle control and service flow rate of 76 gpm (345 lpm) with a backwash of 89 gpm (404 lpm)
|Dimensions||77 × 77 × 234.1 cm|
|Cylinder Size (Inches)||
30 x 72
|Max Flow (m3/hr)||
|Backwash Flow Rate m3/hr|
|Resin Volume (Litres)||